The table below lists every bouncy castle in the BounceParkSG catalogue with its published body dimensions (width, length, height). These are the dimensions of the inflatable unit itself. Safe operation requires additional clearance around and above the unit, which BounceParkSG confirms during quotation based on your venue.
Two models (Rainbow Arch and Bubble Balloon Dome) have no published body dimensions and are listed without measurements.
All 34 models
Room size shortlist tool
Enter your room or area measurements in metres. The tool compares your room dimensions against each model's published body dimensions (both orientations) and returns a shortlist. This is a body-dimension shortlist, subject to additional operating clearance and supplier approval. It does not confirm fit, availability or suitability for your venue.
How to read the table
- W (width), L (length), H (height) are the published body dimensions of the inflatable unit in metres.
- Size category (Large, Medium, Small) follows BounceParkSG's own catalogue grouping.
- These dimensions do not include the extra clearance needed for safe operation. BounceParkSG advises on total operating area when quoting.
- The shortlist tool checks both orientations: the model as listed, and rotated 90 degrees (width and length swapped).
Choosing by space
For indoor events with low ceilings, filter by height first. Several models stand at or below 2.5m tall: Classic Bounce House with Slide (2.5m H), Spiral Candy, Bubble Tea and Sunshine Lion (each 2.5m H), Shark Mouth Bouncy (2.5m H), Lolipop Park Bouncy (1.8m H), and Dino Slide, Unicorn and Racing (each 2m H).
For narrow spaces, check the shorter dimension. The obstacle courses (8m, 9m, 16m, Power Run) have one published body dimension between 3.5m and 4m. A narrow footprint alone does not establish whether a corridor-shaped venue can accommodate the required clearance or access.
For full details on each model, including photos and features, see the bouncy castle rental catalogue.
Frequently asked questions
Examples with compact published body footprints include the Classic Bounce House with Slide (2.5m W x 3.3m L x 2.5m H), and the Dino Slide, Unicorn and Racing bouncys (each 3.4m W x 2.6m L x 2m H). These are published body dimensions, not the total operating area required.
The 16m Obstacle has a listed body size of 16m W x 3.5m L x 4.9m H. The Snowman Bouncy is listed at 8m W x 5m L x 4.5m H. All dimensions are published body dimensions. Operating clearance is additional and confirmed by BounceParkSG during quotation.
No. The width, length and height listed are the body dimensions of the inflatable unit. Safe operation requires additional clearance around and above the unit. BounceParkSG confirms the total operating area needed when quoting for your venue.
The shortlist tool on this page already checks both orientations (original and rotated 90 degrees). If a model appears in the results, it means the body dimensions fit within your stated room measurements in at least one orientation. Operating clearance is additional.
Two models (Rainbow Arch and Bubble Balloon Dome) have no published body dimensions and cannot be matched by the tool. They are still listed in the full table. Contact BounceParkSG for their measurements.
No. This tool produces a body-dimension shortlist only. It does not account for operating clearance, access routes, power supply placement, surface type or venue restrictions. BounceParkSG confirms fit during the quotation process after reviewing your venue details.
Full bouncy castle catalogue All planning guides Ask about sizing